How Much Does It Cost to Install a Power Point in Australia?
Adding, moving or upgrading GPOs: what clients pay and what changes the price.
Quick answer: adding a new double power point in Australia typically costs around $150 to $350 when it can be run off an existing circuit with easy access. Replacing an existing power point is often cheaper, while jobs that need a new circuit, a switchboard upgrade or cabling through brick or concrete can cost considerably more. These are indicative ranges only.
What affects the price
- Replace, add or move. Swapping a faulty outlet is quick. Adding or relocating one means running cable.
- Wall type. Plasterboard with roof or underfloor access is easy. Double brick, rendered or concrete walls take longer.
- Circuit capacity. If the existing circuit is loaded up, a new circuit may be needed, which can mean switchboard work.
- RCD protection. New circuits and many additions need RCD protection under AS/NZS 3000. Older boards without safety switches may need upgrading.
- Outlet type. USB outlets, weatherproof outdoor outlets and higher current outlets cost more than a standard double GPO.
- Number of outlets. Doing several at once usually lowers the cost per outlet.
Common jobs
- Replace a broken power point: low cost, usually a short visit.
- Add a double power point in a bedroom with roof access: typical range.
- Outdoor weatherproof power point for a patio: mid range, depends on cable run.
- Dedicated circuit for an appliance like an oven or air conditioner: higher, often includes switchboard work.
How to quote power point jobs properly
Small jobs are where tradies lose the most money, because travel, parking and the trip to the wholesaler often aren't counted. A good quote:
- Includes a minimum call-out or labour charge that reflects your real costs
- States the number and type of outlets
- Notes whether an existing circuit is used or a new one is needed
- Flags RCD requirements or switchboard limitations found on site
- Lists exclusions, like patching and painting
Just Send It AI uses your Business Cost Calculator figures so even small jobs cover your overheads, and its Wiring Rules Assistant flags RCD and circuit requirements before the quote goes out.
Frequently asked questions
How much does an electrician charge to add a power point in Australia?
Usually around $150 to $350 for a double power point on an existing circuit with good access. Difficult walls, new circuits or switchboard upgrades increase the cost.
Can I install a power point myself in Australia?
No. Installing, moving or replacing power points is electrical work that must be done by a licensed electrician in Australia.
Do new power points need a safety switch?
New circuits and many additions require RCD protection under AS/NZS 3000. Your electrician will check whether your switchboard has the right protection.
Is it cheaper to install several power points at once?
Yes. Doing several outlets in one visit spreads the call-out and travel cost, so the price per outlet usually drops.